Introducing the JET BLACK Series

A New Style of Light Has Arrived!

Edgeless design. Hooded reflectors. The latest advancements in technology were used to build these sleek looking, high powered lights with better beam control and higher light output.


Traditional Bar to Jet Black

Gone are the bezels and screws of a traditional LED light. The lens is now going all the way to the edge, making it hard for snow and ice to stick to it. Wind friction and driving noise are also reduced.

Hooded Reflectors Crosscut

The dark hooded reflectors no longer have the LED bulb placed in their middle. Instead, the LED chip is now located in either the top (single row) or the top & bottom (double row) of the bar. The reflector then bundles the emitted light so that it will shoot out of the bar horizontally. This new design creates less glare and allows for better beam control.


Dual Mounting System Explained

All JET BLACK light bars come with a dual mounting system:

Bars can be installed using either black powder coated stainless steel side brackets or sliding back brackets.


JET BLACK light bars are available in single and double row configurations.

The single row bars are ultra slim, with the bar measuring a mere 40mm in height (47mm with mount included), which means that they will fit almost anywhere!




JET BLACK Series lights are available in the following categories:


JET BLACK Street Legal:*

These bars are ECE R112 certified for auxiliary driving lights, making them street legal in most parts of Canada.

Traditionally, the longest ECE certified light bar measured 20 inches.

For the FIRST time ever, the JET BLACK 30″ and 40″ bars have E-Mark certification, giving you more options!

JET BLACK Street Legal

JET BLACK Street Legal* Bars come in:  20″ straight, 30″ curved and 40″ curved double row bars

10″, 20″, 32″, and 40″ straight single row bars.

All JET BLACK Street Legal bars come with complete wiring harness, dual mounting system and hardware.


*Always check with regional rules and regulations regarding the use of auxiliary driving lights. NightRider™ LEDS strives to deliver the safest and most lawful lights, but cannot be held accountable for regional restrictions, improper mounting, aiming, or wiring.



JET BLACK Extreme:

Same tough housings and LED chips as the street legal bars, but without a cap on power output and more spot reflectors. This means higher light output and higher LUX readings.  The bars are equipped with an internal Temperature Control System (just like the High Intensity Series). This feature allows maximum light output without the risk of overheating.

JET BLACK Extreme Bars

JET BLACK Extreme Bars come in: 13″, 20″, 30″, and 40″ straight double row bars

as well as 10″, 20″, 32″, and 40″ straight single row bars.

All JET BLACK Extreme Bars come with complete wiring harness, dual mounting system and hardware. As an added perk, each bar also comes with a black lens cover so that you can avoid fines when driving down the highway.



JET BLACK Compact Lights:

ALL Jet Black Compacts

For the first time ever, we have an inset flush mount 6″ bar available – for that extra sleek look!

All JET BLACK Compact lights come with internal Temperature Control System (TCS) for maximum light output.


We have also added another cube light to our line-up, the most powerful one yet!

At 40W, this little cube puts out 133% more lumens than the 30W cube, and has over 2.5 times more LUX @ 10 meters than the 30W one!

N1230S compared to NJ1240S

All JET BLACK Compact lights come with ‘Plug&Play’ integrated Deutsch plug and necessary mounting hardware.

Gaskets for inset flush mount options are also included.





New Products