Menu
Edgeless Lens. Hooded Dark Reflectors. Built with latest technology. The result is a sleek looking bar with high output, improved beam control and less glare.
Street legal where E-Mark standards are recognized.
120W / 10,080lm Raw – 3,770lm Effective
| Part ID | NJ13EM |
|---|---|
| Length | 357mm / 14.06" |
| Beam | Driving |
| Lumens | 10,080lm Raw / 3,770lm Effective |
| Colour Temperature | 5,700K – Daylight |
| Wattage (Theoretical) | 120W |
| Wattage (Actual) | 44W (Output is throttled to comply with ECE standards) |
| Amp. Draw | 3.4 @ 12V |
| Voltage Range | 10-30V DC |
| IP Rating | IP67 – Waterproof to 1m |
| Certification Standard | ECE-EMARK |
| Certification Test | ECE R112 (Auxiliary High Beam Driving Light) |
| LEDS | 24 |
| Chip Type | 5W OSRAM |
This bar was built using latest advancements in technology, such as edgeless lens and hooded dark reflectors. The hooded reflectors reduce glare and allow for better beam control. The edgeless design makes it hard for snow and ice to stick to its lens while also reducing wind friction and driving noise.
Each light bar is clearly marked to allow law enforcement and vehicle inspectors easy identification for compliance.
Light bar comes with complete wiring harness, dual mounting system and hardware.
*Always check with regional rules and regulations regarding the use of auxiliary driving lights. NightRider™ LEDS strives to deliver the safest and most lawful lights, but cannot be held accountable for regional restrictions, improper mounting, aiming, or wiring.
